>-----Original Message-----
>From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] 
>On Behalf Of Sascha
>Sent: 11 October 2004 20:50
>To: 'Microcontroller discussion list - Public.'
>Subject: RE: [PIC]- HITIDE bootloader
>
>So I think that my 
>real question will be: what has to be done to instruct the 
>PICC18 linker to relocate the vectors to 200h, 208h, 218h?
>

Simply add the switch -A200 to the linker command line.

Regards

Mike

=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================
_______________________________________________
http://www.piclist.com
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist