My ICD2 started to behave strange this weekend. I can't get in contact=20
with it anymore.

- The busy lamp is steady on.
- The USB driver is in place and the system reacts if I take out the=20
cable and put it in again.
- I have changed to a new USB cable, no improvement.
- I have removed the driver and reinstalled it. No change.
- I have moved installed MPLAB on a different clean machine. No contact=20
there either.

Does anyone recognize this behavior or have some other suggestion(s) on=20
something I could test.

The strange thing is that the last thing I did before the weekend was to=20
upload some code to a device and I then unplugged the ICD2 and then it=20
has just been unplugged until now and when I connected it again it does=20
not work.

/Ake

--=20
  ---
Ake Hedman (YAP - Yet Another Programmer)
eurosource, Brattbergav=E4gen 17, 820 50 LOS, Sweden
Phone: (46) 657 413430 Cellular: (46) 73 84 84 102
Company home: http://www.eurosource.se
Kryddor/Te/Kaffe: http://www.brattberg.com
Personal homepage: http://www.eurosource.se/akhe
Automated home: http://www.vscp.org

_______________________________________________
http://www.piclist.com
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist