I'm stumped. I've never had this error before unless the clock was 
broken (it isn't).

The PIC (PIC16LF88) runs perfectly at 3.5V, will program my
"wink" test fragment from the ICD2 as a programmer, and when
selected as debugger, all seems OK except for the error. (NO, I
don't have ICD2 selected at both programmer and debugger).

Neither PGC, MCLR, or PGD is connected to anything except the
debugger. Well, MCLR has a 47K pullup on it only to VDD.

I haven't tried to run the PIC at 5V because it has some 3.6V max
peripherals attached.

The PIC runs flawlessly for the wink test.

Any ideas, fellow PIClisters?

--Bob

-- 
Note: Attachments must be sent to
attach@engineer.cotse.net, and 
MAY delay replies to this message.
       520-219-2363




-- 
Note: Attachments must be sent to
 attach@engineer.cotse.net, and 
 MAY delay replies to this message.
        520-219-2363

_______________________________________________
http://www.piclist.com
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist