On Thu, Sep 16, 2004 at 04:36:06PM -0700, Anthony Van Herrewege wrote:

> Ok, I'll just use a jumper to select between normal function & short to
>ground for programming. (It seems this is not in Microchip's ICSP Guide, but
>of course I could have missed it.)

The reason I suggested the resistor is to keep from having to short it.
All you really want to do is not let the LVP pin float during the probably
brief durations that the config memories are erased and the LVP pin is on.
33k has a neglible impact on any digital I/O function but will keep the
pin grounded during programming.

BAJ
_______________________________________________
http://www.piclist.com
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist