Ken Pergola wrote :

> Hi Jan-Erik,
> 
> My response was not saying that the resistor is
> needed to satisfy the original poster's question.

Hi !
But you wrote :

  "This practice is detailed in the I2C specification and
   makes a more robust design, which is probably why the
   original poster has the series resistors in there."

I (still) don't think it was.

I thought that there was a risk that the quote above
could be read as a verification of the potential problem as
outlined in the original post. Which was a non-problem
based on a misunderstanding of the I2C bus (that
devices pulls the SDA line *activily* both high and low).

I was just trying to clear that out.

Sorry for the mess and
Best Regards,
Jan-Erik.
_______________________________________________
http://www.piclist.com
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist