Maybe it is a mail reader issue then.  Using gmail, and looking back
in the thread, the only things I see in column 1 are the #include, the
#defines, and the jump labels.

Agree that using no whitespace is a PITA to read, and can see how it
would look sloppy if seen that way.  All I can offer is that it was/is
indented in the code, and the reader I am using shows it that way in
the thread.  Apologies if the cut and paste into the gmail compose
window somehow messed that up...\

--Joe


On Sun, 5 Sep 2004 10:52:12 -0400, Olin Lathrop
<olin_piclist@embedinc.com> wrote:
> Joe Jansen wrote:
> > Also, before posting I made sure that there were no errors,
> > warnings, or even messages from mpasm when I compiled inside the IDE
> > (MPLAB 6.60), so contrary to suggestion, compilation was not an issue.
> 
> Then you must have changed the code before sending it to the list.  The code
> you posted have everything starting in column 1, which is a bad idea, makes
> it hard to read, and will produce lots of warnings from MPASM.
> 
> 
> 
> 
> *****************************************************************
> Embed Inc, embedded system specialists in Littleton Massachusetts
> (978) 742-9014, http://www.embedinc.com
> _______________________________________________
> http://www.piclist.com
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
_______________________________________________
http://www.piclist.com
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist