This is a multi-part message in MIME format.

------=_NextPart_000_01D6_01C49068.119989D0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

----- Original Message ----- 
From: "Victor Faria" <victorf57@cox.net>
Subject: Re: [OT]:Help Erro message on winxp


> I do go to the dir specified, but the autoexec.nt. is not there.
> YES  I'm showing hidden files and folder under folder options.
> is it possible that there should be one there but is missing???
> if so,could someone send me a copy to get me started.

Here's mine.  I believe all except the last line is the default and the last
line probably won't hurt you.

--McD

------=_NextPart_000_01D6_01C49068.119989D0
Content-Type: application/octet-stream;
	name="AUTOEXEC.NT"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="AUTOEXEC.NT"

@echo off

REM AUTOEXEC.BAT is not used to initialize the MS-DOS environment.
REM AUTOEXEC.NT is used to initialize the MS-DOS environment unless a
REM different startup file is specified in an application's PIF.

REM Install CD ROM extensions
lh %SystemRoot%\system32\mscdexnt.exe

REM Install network redirector (load before dosx.exe)
lh %SystemRoot%\system32\redir

REM Install DPMI support
lh %SystemRoot%\system32\dosx

REM The following line enables Sound Blaster 2.0 support on NTVDM.
REM The command for setting the BLASTER environment is as follows:
REM    SET BLASTER=3DA220 I5 D1 P330
REM    where:
REM        A    specifies the sound blaster's base I/O port
REM        I    specifies the interrupt request line
REM        D    specifies the 8-bit DMA channel
REM        P    specifies the MPU-401 base I/O port
REM        T    specifies the type of sound blaster card
REM                 1 - Sound Blaster 1.5
REM                 2 - Sound Blaster Pro I
REM                 3 - Sound Blaster 2.0
REM                 4 - Sound Blaster Pro II
REM                 6 - SOund Blaster 16/AWE 32/32/64
REM
REM    The default value is A220 I5 D1 T3 and P330.  If any of the =
switches is
REM    left unspecified, the default value will be used. (NOTE, since =
all the
REM    ports are virtualized, the information provided here does not =
have to
REM    match the real hardware setting.)  NTVDM supports Sound Blaster =
2.0 only.
REM    The T switch must be set to 3, if specified.
SET BLASTER=3DA220 I5 D1 P330 T3

REM To disable the sound blaster 2.0 support on NTVDM, specify an =
invalid
REM SB base I/O port address.  For example:
REM    SET BLASTER=3DA0

PATH %PATH%;C:\USB\ALDUS;
------=_NextPart_000_01D6_01C49068.119989D0
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit

_______________________________________________
http://www.piclist.com
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist

------=_NextPart_000_01D6_01C49068.119989D0--