>-----Original Message-----
>From: pic microcontroller discussion list
>[mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Alan B. Pearce
>Sent: 25 August 2004 14:30
>To: PICLIST@MITVMA.MIT.EDU
>Subject: Re: [AD:] (will be) Small CNC mill, controller and
>software for ~$500
>
>
>Just had a new CPC catalogue arrive on a colleagues desk here
>in the UK, and while browsing through it, in the PCB
>consumables section is a "Low Cost CNC Kit" for GBP256.02,
>catalogue #PC00380. It does require a Minicraft Drill model
>MB150 (CPC # TL-MB150)
>
>Don't know if this is also available in the USA, but it sure
>would come inside the US$500. Might be too light weight for
>what is envisaged, but for the price is probably about as good
>as you can get.


Details online at
http://custom1.farnell.com/cpc/product.asp?catalog%5Fname=cpc+catalogue&prod
uct%5Fid=PC0038066

No pictures unfortunately.

Regards

Mike


=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics