That sounds suspiciously like the Milford Instruments 3 axis machine shown
here :

http://www.milinst.com/robotics/robotics.htm#axis

I've always fancied one but have decided to build one from scratch sometime
in the next 25 years to save a few pennies ;)

Dom

-----Original Message-----
From: pic microcontroller discussion list [mailto:PICLIST@MITVMA.MIT.EDU] On
Behalf Of Alan B. Pearce
Sent: 25 August 2004 14:30
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [AD:] (will be) Small CNC mill, controller and software for
~$500

Just had a new CPC catalogue arrive on a colleagues desk here in the UK, and
while browsing through it, in the PCB consumables section is a "Low Cost CNC
Kit" for GBP256.02, catalogue #PC00380. It does require a Minicraft Drill
model MB150 (CPC # TL-MB150)

Don't know if this is also available in the USA, but it sure would come
inside the US$500. Might be too light weight for what is envisaged, but for
the price is probably about as good as you can get.

--
http://www.piclist.com hint: The list server can filter out subtopics (like
ads or off topics) for you. See http://www.piclist.com/#topics

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.742 / Virus Database: 495 - Release Date: 19/08/2004


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.742 / Virus Database: 495 - Release Date: 19/08/2004

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics