>  If split-second timing is
> important, remember that the solenoid will energize as quickly as
> before, but it may hang up for a split-second before releasing.

If timing is important you can use a zener in series with the diode, or
even a resistor. The voltage at the 'low' side of the coil will be
higher, so you must decide what the maximum voltage there can be.

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu