At 08:19 PM 8/17/04, you wrote:
>My dryer quit recently - wouldn't start spinning every few loads, and
>would sometimes stop spinning during a load.  I disassembled it, found a
>bad drum support roller, and replaced both rollers, the belt, and the
>drum support slides on the front.
>
>Thinking all would be well, I assembled it and it has the same problem.
>If I start turning it by hand then it starts just fine.

I had a dryer with the same symptoms last year. My dryer was a 220V dryer.
It turned out one 110V leg of my 220V was low due to problems the electric
company was having with a transformer down the block. After they fixed
their problem my dryer worked fine.

David Bearrow

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body