In a message dated 8/13/2004 11:59:51 AM Eastern Daylight Time,
martin@NNYTECH.NET writes:

What is  the standard procedure for removing the varnish/coating that is
on magnet  wire? I find it to be a royal pain.
Thanks



Just off the end of the wire so you can solder it?  If so, I use  some fine
emery cloth to do the trick.  Otherwise you can use a very very  hot soldering
iron.

Randy  Abernathy
4626 Old Stilesboro Road NW
Acworth, GA 30101-4066
Phone /  Fax: 770-974-5295
Cell: 678-772-4113
E-mail: Cnc002@aol.com

I  furnish technical support, repair, and other related services for your
industrial woodworking machinery. My background as Senior Service Engineer for
the SCMI Group for nearly fifteen years with factory training, combines with
my  extensive background in electronics, mechanics, pneumatics, electrical and
CNC  machinery to offer you needed support for your  machinery.

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu