> The attached is a picture of a pcb=2E  The pcb needs to be in weird shap=
e,
> looks like circle, but cut, not from half, a little below from middle=2E=

> How do I get rid of the bottom empty part as well as the extending line =
in
> the middle (to the left and right), so that the gerber file will be
> correct for board houses=2E

For the circle, you should try using the Arc function=2E Define the center=
, startpoint and endpoint=2E For the lines, have you tried just moving the=
 start/end points?


hope that helps,
christian

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.