>-----Original Message-----
>From: pic microcontroller discussion list
>[mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of D. Jay Newman
>Sent: 03 August 2004 14:41
>To: PICLIST@MITVMA.MIT.EDU
>Subject: Re: [AD]: (will be) Small CNC mill, controller and
>software for ~$500
>
>
>I'm wondering if a machine could be designed using 80/20
>aluminum extrusions (http://www.8020.net/)?

Useful looking stuff, but typicaly priced for industrial useage (i.e.
expensive).

>
>I'd still suggest the spindle from http://www.cnconabudget.com
>

That guys makes some quality looking components for pennies almost.  I
wonder if it's worth James approaching him to commission an entire mill?

Mike

=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu