Hi Wouter,
        It something I would go and buy directly to my transformer company.
I guess I can contact you with them as I assume they can do such component
(not taking so long as 2 months) but I guess it wouldn't work for you since
I'm in Argentina... anyway take a look at the local transformers
manufacturers...

Regards

Mauricio D. Jancic
Janso Desarrollos - Microchip Consultant
(54) 011 - 4542 - 3519
Lugones 3238 "B" - C1430ECN
www.janso.com.ar
info@janso.com.ar
MSN: jansodesarrollos@hotmail.com
> -----Original Message-----
> From: pic microcontroller discussion list [mailto:PICLIST@MITVMA.MIT.EDU]
> On Behalf Of Wouter van Ooijen
> Sent: Friday, July 16, 2004 6:21 AM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Re: [EE:] inductor 9 mH 15A
>
> > "inductor" is the correct serach term, but a 9mH 15A inductor
> > will be a very
> > large component.  Not something a normal electronics shop is likely to
> > stock, and will probably be difficult to source even from the larger
> > distributors.  Are you sure he didn't mean 9uH?
>
> No, sure about it. He found some, but 2 month delivery time. He expects
> something like 8 x 8 x 8 cm ( 3 x 3 x 3 inch). So far I did find some
> 15A stuff at DigiKey, but not 9 mH.
>
> Wouter van Ooijen
>
> -- -------------------------------------------
> Van Ooijen Technische Informatica: www.voti.nl
> consultancy, development, PICmicro products
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics