On Thu, Jul 15, 2004 at 11:12:51AM -0400, Martin Klingensmith wrote:
> I figured out one part of the problem. I hooked up my oscilloscope to
> the TX pin on the PIC as well as the MAX232, and they are outputting all
> of the characters correctly, so the problem is somewhere between my
> computer and the terminal program.

Is the terminal program using hardware flow control, and if so have you
checked the levels on those pins?

Chris

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads