I will do some work myself, either. No x-rays this time :). a wood microscope and a 16c71. Dennis. ----- Original Message ----- From: "Mike Hawkshaw" To: Sent: Friday, July 09, 2004 4:47 PM Subject: Re: [OT]: PIClist posters (was Re: [ADMIN:] Output of your job "sneaker23") > Bob, > > If you do get into the chip successfully (I wonder if a milling machine > would work here), fasten a good quality magnifying glass onto the front of > the cammera lens somehow, and you will be able to focus very close up and > personal. > > All the best....Mike. > > ----- Original Message ----- > From: "Bob Ammerman" > To: > Sent: Friday, July 09, 2004 8:32 PM > Subject: Re: [OT]: PIClist posters (was Re: [ADMIN:] Output of your job > "sneaker23") > > > > I have a dead 18C452JW I could try doing this to. > > > > Bob Ammerman > > RAm Systems > > > > --- > Outgoing mail is certified as Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.716 / Virus Database: 472 - Release Date: 05/07/2004 > > -- > http://www.piclist.com hint: To leave the PICList > mailto:piclist-unsubscribe-request@mitvma.mit.edu -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu