I have a side project, probably just a one off, where I need a low power
transmitter.
Something around the range 2.5 to 25mw across the spectrum of  ~100 to 500
MHz (does not have to have a flat output power level across the entire
spectrum)
Needs to be capable of  about 1.25 to 2.5 KHz deviation (sine wave or
something close, squareish waves would be a plus) in the low  audio range.
Transmit frequency needs to be controllable via a micro-controller (again
accuracy not terribly critical but this is the one area that should be
fairly accurate) if I tell it to transmit at 450MHz it should be within 5 or
10KHz of this frequency and reasonably stable.

KF4HAZ - Lonnie

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu