Pressed send too early.

Postage from here to anywhere in Australia is $6.30 for express post
Postage from here to NZ is $7.40 for regular post




-----Original Message-----
From: pic microcontroller discussion list [mailto:PICLIST@MITVMA.MIT.EDU] On
Behalf Of Russell McMahon
Sent: Tuesday, 29 June 2004 2:43 PM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [AVR:] ATtiny11s group buy list -- Interested people can sign
up here - shipping


Liam - are you willing to send 50 on to NZ with postage added (or more if eg
Jinx gets in on this).

If so, I would take a tube of 50 too.
Maybe if there were enough NZ 'ers we could justify a bag-lot sent here
directly.

Easiest and safest packing method in a bag is, as already suggested, to cut
the tubes in N sections and tape the ends. Needs to be done by someone with
an awareness of basic electrostatic handling procedures.




        Russell McMahon

> Sounds fine by me :)

> Yes, I agree, cut the tubes into 2-4 pieces and send them in a Jiffy
> bag (padded). David
>
> Martin Klingensmith wrote:
>
> > He probably doesn't have all that stuff unless you want to pay more
> > for handling. I have no problem with getting split tubes taped on
> > the end.
> >
> > --
> > --
> > Martin Klingensmith
> > http://infoarchive.net/
> > http://nnytech.net/
> >
> > Mark Jordan wrote:
> >
> >>         Take them out of the plastic tube and stick them on one of
> >> those black conductive foam (rubber?) sheets. Put the foam sheet on
> >> an anti- static plastic bag and ship it inside a bubble-wrap
> >> envelope.
> >>
> >>         Mark Jordan
> >>
> >>
> >>
> >> On 28 Jun 2004 at 17:20, Chetan Bhargava wrote:
> >>
> >>
> >>> The cheapest way to Australia would be USPS (http://www.usps.com)
> >>>
> >>> I would need suggestions on shipping as the tube would be too long
> >>> to ship as it is. I might have to break the tube into two for
> >>> shipping into a padded envelope. Also we would have to standardize
> >>> the shipping options.
> >>>
> >>> Any suggestions would be appreciated.
> >>
> >
> > --
> > http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> > email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
> >
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu