> -----Original Message-----
> [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of David VanHorn
> Sent: Friday, June 25, 2004 11:20 AM
> The ones I have seen, just used offset pads, and shoved the PCB
> between the standard solder cup pins.  They may have used thinner
> board stock, but I don't have one at hand to measure.
>

I've found that 1/32" thick PCB material fits best between the solder cup
pins on the dongles I designed for a client many years ago.

Paul

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.