Ooopsie, sorry about the typo. Probably obvious, but just in case

> For example, at a lower speed, 3.2768MHz

> Fosc = 819200Hz,  /256 = 3200 TMR0 rollovers/sec. Set pre-scaler
> to /32 for 100Hz interrupt

Fosc is 3.2768MHz, 819200Hz is the TMR0 count rate

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body