On Wed, 23 Jun 2004, Michael Hagen wrote:
> Scott Edwards
>
> http://www.seetron.com/an_bez1.htmtt

Thanks for the link.  However, all these units (unless I'm missing
something) still have bare PCBs exposed to the elements.  The display
units I'll be required to install will be going into a control panel
on industrial cutting machines.  There's a tonne of oil floating
around and a tonne of loose fine steel floating around.  I would like
to have the LCD sealed in a box that can be snapped into hold cut into
the panel.  I need to try to keep the environmental concerns away from
the LCD if possible.

Thank you for your help.
        -- Robert

--
    Robert James Kaes    ---  Flarenet Inc.  ---    (519) 426-3782
                 http://www.flarenet.com/consulting/
      * Putting the Service Back in Internet Service Provider *

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body