I'm located near Sacramento, CA ----- Original Message ----- From: Win Wiencke To: Sent: Tuesday, June 22, 2004 8:54 AM Subject: Re: [AD:]Laser cut electronic panels > We've had good luck with this technology so we're interested. Where are you > located? We are in the northeastern US. > > Win Wiencke > Image Logic Corporation > . > ----- Original Message ----- > From: "Vern Jones" > To: > Sent: Tuesday, June 22, 2004 2:38 AM > Subject: [AD:]Laser cut electronic panels > > > Hello group, > > I have at my disposal a steel, stainless steel, wood or plastics laser > cutting tool. It can be used to cut out a stainless steel front panel or an > intricate fold up box design. Almost anything that can be constructed with > flat metals, wood sheet or plastic sheets. Rates are about $120 per hour of > cut time. This can produce about 30 to 50 panels depending on size and > number of cutouts. What is needed to do the work is a standard Autocad > drawing in .dxf format. Inaddition to the Cutting fee, there is a materials > fee for the metal, wood or plastic used. The machine can cut a 4' x 8' > maximum sized panel. It can also cut decorative shapes as well. > > Material thickness. Steel, Carbon Steel = .25" > Stainless Steel = .25" > Plastic = .5" > Plywood = .75" > > Kerf size approx .0015" > > Vern Jones, Sound Research > > -- > http://www.piclist.com hint: The PICList is archived three different > ways. See http://www.piclist.com/#archives for details. > > -- > http://www.piclist.com hint: The PICList is archived three different > ways. See http://www.piclist.com/#archives for details. > -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.