Hi all

I'm currently putting an inverter design through compliance testing, and
have a problem with fast transients on the incoming power lines. I've added
common mode chokes and Y-cap to address conducted emissions, but electrical
fast transients are getting through, and dirupting operation of the
processor (16F870). I'm looking as some series inductors as a solution, and
was wondering if anyone on the list has had similar experiences, and how
they were resolved. Input currents are around 5A.

Regards

Ian Rozowsky
R&D Director
Centurion Systems (Pty) Ltd.
Box 506 Cramerview 2060 South Africa
roz**@centsys.co.za
||Anti-spam - please remove the ** from the e-mail address before sending||
http://www.centsys.co.za


-------------------------------------------------------------------------
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager. Please note that any views or opinions presented
in this email are solely those of the author and do not necessarily
represent those of Centurion Systems (Pty) Ltd. Finally, while Centurion
Systems attempts to ensure that all email is virus-free, Centurion Systems
accepts no liability for any damage caused by any virus
transmitted by this email.
-------------------------------------------------------------------------

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.