Hi Vern

What country are you located in just out of curiousity.

Regards

Dom

-----Original Message-----
From: pic microcontroller discussion list [mailto:PICLIST@MITVMA.MIT.EDU] On
Behalf Of Vern Jones
Sent: 22 June 2004 07:38
To: PICLIST@MITVMA.MIT.EDU
Subject: [AD:]Laser cut electronic panels

Hello group,

I have at my disposal a steel, stainless steel, wood or plastics laser
cutting tool. It can be used to cut out a stainless steel front panel or an
intricate fold up box design. Almost anything that can be constructed with
flat metals, wood sheet or plastic sheets. Rates are about $120 per hour of
cut time. This can produce about 30 to 50 panels depending on size and
number of cutouts. What is needed to do the work is a standard Autocad
drawing in .dxf format. Inaddition to the Cutting fee, there is a materials
fee for the metal, wood or plastic used. The machine can cut a 4' x 8'
maximum sized panel. It can also cut decorative shapes as well.

Material thickness. Steel, Carbon Steel     = .25"
                             Stainless Steel           = .25"
                             Plastic                       = .5"
                             Plywood                     = .75"

Kerf size approx .0015"

Vern Jones, Sound Research

--
http://www.piclist.com hint: The PICList is archived three different ways.
See http://www.piclist.com/#archives for details.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.