----- Original Message -----
From: "Matthew Brush" <matthewbrush@YAHOO.CA>
Subject: Re: [PIC:] ICSP Problem, probably stupidity


> So no one has had the error during programming that
> while writing at 0000 it doesn't verify the proper
> value?
>
> I'm using ProgPic2 and the actual error is:
> Write Error at: 0000
> Wrote: 3000
> Read: 3FFFF

Unfortunately, this seems to be the most common response to ANY problem.  I
have seen that effect when I tried to program an 877A with software that
only supports the 877, and when I have forgotten to apply power to the
programmer.  So the specific error isn't all that helpful.

> connector for this because it's a F877 and my

It IS and 877 and not an 877A, is that correct?

72/73 de WB8RCR    http://www.qsl.net/wb8rcr
didileydadidah     QRP-L #1446 Code Warriors #35

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.