Excellent point, although I must admit that "STRAIN" is a terminology I have not been exposed to. The non-inverting configuration for many video op-amps require a gain of at least 10. ----- Original Message ----- From: "Shawn Wilton" To: Sent: Friday, June 11, 2004 1:58 PM Subject: Re: [EE] OPAMP use > The only thing that should concern you regarding strain would be that if > you drop your gain too low then the amp will no longer be stable as it's > receiving positive feeback instead of negative feedback and as a result > the amp will receive too much positive feedback (goes to infinity) and > you will eventually have a situation where it is being pushed too hard > and will fail. > > This can be ovserved in the bode plots for the gain of the amp. It has > to do with the gain and the phase at which it occurs. You would be wise > to construct a simple bode of the magnitude and phase and look at > whether or not the gain comes back to less than one before it hits 180*. > If not, then you will at least know what minimum gain is required for > stable operation. > > -Shawn > > > > Luis Moreira wrote: > > > exactly my question. > > > > -----Original Message----- > > From: David VanHorn [mailto:dvanhorn@CEDAR.NET] > > Sent: 11 June 2004 15:34 > > To: PICLIST@mitvma.mit.edu > > Subject: Re: [EE] OPAMP use > > > > > > > >>I read a few things about it and it seems that the non inverting > >>configuration puts more strain on the OPAMP... > > > > > > Strain? In what way? > > > > -- > > http://www.piclist.com hint: The list server can filter out subtopics > > (like ads or off topics) for you. See http://www.piclist.com/#topics > > > > -- > > http://www.piclist.com hint: The list server can filter out subtopics > > (like ads or off topics) for you. See http://www.piclist.com/#topics > > -- > http://www.piclist.com hint: The list server can filter out subtopics > (like ads or off topics) for you. See http://www.piclist.com/#topics > -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.