> > Wisp628 has a dedicated pin that is pulled low during
> programming-entry.
> > You can use it for this purpose, or arrange for your target circuit
> > itself to pull LVP low. But better not let it float, that will cause
>
> Does this mean that LVP should be pulled low during programming?
> Something my current programmer _doesn't_ do.
>
> Could this be the cause of my very erratic programming success?

'could'? defintely. either you or your programmer should do this.

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics