Hi Guys
For years I been using the inverting OPAMP circuit when amplifying a signal,
by using two stages to get the signal in the right phase. But Now someone
that works with me just designed a circuit with a non inverting OPAMP
configuration, and apart form the fact the gain can not be lower than 2 I
can not see any problems with using this configuration. in top of it all I
only need one OPAMP not two.
I read a few things about it and it seems that the non inverting
configuration puts more strain on the OPAMP...
Do any of you have any info on this and any other problems that could arise
by using this configuration over the inverting one.
best regards
                Luis

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics