www.custompcb.com seems to be pretty cheap.  The have 4x5.5 single sided
boards for $9 (2 piece minimum).

They also allow panelization of 1 or more designs (and even cut them out for
you) on 8x11 panels which are 2 for $48 up to 10 for $138.

I have never tried them because for a single sided board I'll etch it myself
and for a double sided, the price doubles.

Jason

----- Original Message -----
From: "Spehro Pefhany" <speff@INTERLOG.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Wednesday, June 09, 2004 1:48 PM
Subject: [EE]: Supplier of single-sided PCB prototypes


> Are there any really cheap (including shipping cost) suppliers of
> single-sided prototype PCBs that anyone would like to share?
>
> I'm looking for non-plated through holes (so, not the typical 2-layer PCB
> process) and if they had access to the typical low-cost crappy laminates
as
> an option, all the better.
>
> Best regards,
>
> Spehro Pefhany --"it's the network..."            "The Journey is the
reward"
> speff@interlog.com             Info for manufacturers:
http://www.trexon.com
> Embedded software/hardware/analog  Info for designers:
http://www.speff.com
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu