Not too sure about the freeware/shareware - but a good place to start is
www.compilespot.com. These guys let you compile your own programs online
in PICBasic STD & pro, (with some limitations including 50-line limit).
If memory serves, there are some other BASIC variants thrown in there
too, (I've not used this site in a while after purchasing full versions
of the software).

Also, I believe that Crownhill their own version at www.picbasic.org
where a demo version is available, (not a *big* fan myself - but hey, it
works!)

Hope this helps - compilespot.com sure gets two thumbs up from me!

Cheers,
Stuart
www.psirens.co.uk


-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Philip Stortz
Sent: 07 June 2004 08:42
To: PICLIST@MITVMA.MIT.EDU
Subject: [OT] freeware/shareware basic for dos/windows?

Is there a shareware or freeware version of basic for dos/windows?
(I've mostly been using macs for a while and haven't used dos or windows
for a while).  I'll be programming some pic16f688 chips and need to
write a programing program (taking hex files for input) to use a
parallel port programer (similar to most of those on the piclist web
site).  Once it's working i will of course post the schematic for the
programmer and the software as open source.

i'll be using a programmer very similar to <
http://www.rotgradpsi.de/mc/picprog/picproge.html> except that i'll be
using 2 adjustable voltage regulators so i can adjust the vcc during
verify and adjust the programming voltage as well, and i'll be using
mosfets to switch the Vcc and Vpp and an open collector inverter with a
pullup resistor to drive the biderectional data line.

when i have some time i'll also be designing a serial programmer for the
mac and pc and writing the code in C which i'm still learning (i have a
copy of code warrior which makes it relatively easy to write a program
for dos and the mac os in C or C++ ).  I'll try and design this
programmer to handle several different chips with some sort of a chip
"definition" file for each chip type so that it's more universal
(including non pic chips).

for now though, i just need to get these 16f688 chips programed for a
clock chipping project (it will be a serial port controlled oscillator
adjustable from 1 mhz to 133 mhz in 100khz steps and about the size of a
surface mount crystal oscillator, later i'll work on a faster version
for more recent machines but a lot of people like me still enjoy playing
with older, slower macs, some of which use a crystal that's half the
chip speed).  Thanks.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.