I wouldn't of had the canolies to buy it if it weren't for the posts that I
was reading in the hours before I went on eBay...just to peek around of
course :-)

Thanks for the feedback...now I am really excited...just have to figure out
what they are used for tee-hee :-)

In all seriousness, I started off in electronics learning how to CNC my mill
(still learning), then built my own dro (ShumaTech 350), now PIC
programming...it's a freaking sickness....somebody help......:-)

John

-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Tom
Sent: Wednesday, June 02, 2004 8:17 PM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: Tektronix 465 Oscilloscope 2 Channel 100MHz w/ probe I just
grabbed this on e-bay.


At 07:20 PM 6/2/04 -0500, you wrote:
>Item number: 3818250971
>
>Hi all, new here...was following your oscilloscope thread a bit, went on
>ebay, saw this, had 4 min left...impulse purchase...paid 142...did I do
>ok????
>
>Thanks for input (didn't have time to ask then buy ;-)
>
>John
>Chicago burbs

Looks like a steal, John. It is not only a 465 but is the storage version.
Plus it apparently comes with a probe (they usually sell these separately)
and a cover and the topside pouch that probably holds the manual.

If the knobs/switches are not worn out, you've got a great scope on your
hands.
Congrats and good luck!
Tom

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.