Harold,

 Just carefully solder the 4 corner pins on the DIP switches
 into the sockets.   This will achieve the same effect.  I don't
 know of any DIP switches with WW pins on them.  Of course, that
 doesn't mean they don't exist.  Just that I haven't seen any.
 I use the solder the pins method myself regularly to prevent DIP
 switches from falling out or being moved out of the sockets.

 Hope this helps you out.

                                               Regards,

                                                 Jim




> Anyone aware of any wire wrap dip switches? We need to raise the
> switches off the board to poke through a panel. We're currently putting
> the switches in wire wrap sockets, but they tend to fall out.
>
> Any ideas?
>
> THANKS!
>
> Harold
>
>
> --
> FCC Rules Online at http://www.hallikainen.com
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.