>-----Original Message-----
>From: Howard Winter [mailto:HDRW@H2ORG.DEMON.CO.UK]
>Sent: 24 May 2004 15:03
>To: PICLIST@MITVMA.MIT.EDU
>Subject: Re: [EE:] power factor change depending on voltage or phase?
>
>This has always perplexed me: surely if you're connecting
>across 2 of 3 phases (something we don't do in the
>UK)

Just to add that in the UK, industrial installations use a 415 volt 3 phase
connection almost exclusively for any high current machinery.

Regards

Mike




=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================
Any questions about Bookham's E-Mail service should be directed to
postmaster@bookham.com.

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu