> The test crystal is shown as an EPSON C-001R32.768K-A, which has
> a recommended load of 12.5 pF.
>
> There seems to be a disconnect here, if I use 100pF or even 68pF,
> aren't I going to load the crystal to the point my frequency will be
pulled?

I just looked up the part I always use, made by Hudson. It too suggests
12.5pF yet, as I said, I've always used 100pF with apparently no problem

Maybe I've learned something

Hope not ;-) or I'm stuck with a bag of 100pF

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body