I had some problems to start with but it all works ok now.

uncheck "LOW VOLTAGE PROGRAM ENABLE" or pull portb.5 low

After changing xtal programmed type from xt / hs / h4pll the power needs to
be cycled.

you need to watch capitalisation on things because its using mplab instead
of PM for the assembler.

e.g. DEFINE OSC 40 < must be capitals.

Richard Benfield

----- Original Message -----
From: "James Tu" <james@2-BIT-TOYS.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Monday, May 24, 2004 7:58 AM
Subject: [PIC:] ICSP for 18F452


> I'm using the microEngineeringLabs EPIC programmer.  I've made my own
> donggle that connects to the programmer so that I can do ICSP for
> PICs.  I've been successful with other PICs, but am having problems with
> the 18F452.
>
> Is it temperamental?  Have people had problems with it in the past?
>
> Thanks!
>
>
> James Tu
> james@2-bit-toys.com
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body