Hi,
  I've just been trying to get example1.c (from the MPLAB-C examples pack) to
work on a PIC18F252. Problem is, although the '252 LED flasher hexfile from
www.voti.nl will program into the chip (and, crucially, run) fine, the output
hexfile from C18 won't do anything. MPLAB-SIM steps through the compiled C
source OK. I've followed the instructions in the C18 "Getting Started" guide
to the letter :-/
  How do you set the config fuses on an 18F252 using C18? I'm using a WISP628
programmer and the BumbleBee programming software.
  Does anyone have a known-working LED flasher program for C18 lying around
on their HDD that I could use as an example?

Thanks.
--
Phil.                              | Acorn Risc PC600 Mk3, SA202, 64MB, 6GB,
philpem@dsl.pipex.com              | ViewFinder, 10BaseT Ethernet, 2-slice,
http://www.philpem.dsl.pipex.com/  | 48xCD, ARCINv6c IDE, SCSI
... Be *excellent* to each other

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads