Thanks Randy That seemed to do the job. Richard ----- Original Message ----- From: "Randy Jones" To: Sent: Saturday, May 15, 2004 4:21 PM Subject: Re: [PIC:]problems with epic programmer > Hi Richard, > > Oops -- sent a blank email before I typed anything! > > The latest EPIC software release adjusts timing for faster PCs... I ran > into the same thing and the new software resolved it. Just download the > "beta" at: > > http://www.melabs.com/support/epicbeta.htm > > Support for the latest PICs, such as 16F688 and a number of others, etc. is > also included. > > -Randy > www.glitchbuster.com > > > > > ----- Original Message ----- > From: "Richard" > To: > Sent: Friday, May 14, 2004 9:11 AM > Subject: [PIC:]problems with epic programmer > > > > Does anyone know if there is a known problem using a dual processor pc > using > > an epic programmer ? > > > > I've just upgraded my pc to a pc with dual AMD MP2400 processors using > > windows 2000. > > I'm using an epic programmer ver. 2.40beta ( which was working ) > > I'm using pics that i've used before > > I get a "code programming error at 0000" > > > > I've just tried it on another pc an it works fine. > > > > Any suggestions ? > > > > Thanks in advance > > > > Richard Benfield > > > > -- > > http://www.piclist.com#nomail Going offline? Don't AutoReply us! > > email listserv@mitvma.mit.edu with SET PICList DIGEST in the body > > -- > http://www.piclist.com hint: To leave the PICList > mailto:piclist-unsubscribe-request@mitvma.mit.edu -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email listserv@mitvma.mit.edu with SET PICList DIGEST in the body