Tino, Again they reefer to an article that I have been unable to get my hands on (Everyday Practical Electronics, January 2003, page 44-51 (*very* interested in a copy if someone have access to it.). I haven't built one and tested it in practice so I'm not sure that it works or how bad/good it is. Still the concept is interesting. Almost the same concept is used for water volume meters though and works quite well. To level the measuring device up with the wind direction would be trivial. Also it would be easy to use something else than a chopstick to mount the sender received on. Turbulence can possibly be a problem. Don't know how much influence it has. Mounting the received/transmitter further apart may improve things. Regards /Ake -----Ursprungligt meddelande----- Fr=E5n: pic microcontroller discussion list [mailto:PICLIST@MITVMA.MIT.EDU]F=F6r B=FChler, Martin Skickat: den 18 maj 2004 14:50 Till: PICLIST@MITVMA.MIT.EDU =C4mne: Re: [PIC]: Weather Sensors the wind speed sensor looks really interresting. but can you tell me how this works? I think it has always to be adjusted to the wind direction, to get correct results. in addition, the measure path will be in the wind shadow of the transmitter, or there will be turbulences between transmitter and receiver, giving wrong results. further, from my experience, you will get ultrasonic transmission through the chopsticks, if you mount both ultrasonic devices to them. so I don't think that this will work very well. any contrary experience? tino ************************************************************************ ****************************** >-----Original Message----- >From: Ake Hedman [mailto:akhe@EUROSOURCE.SE] >Sent: Friday, May 14, 2004 9:09 PM >To: PICLIST@MITVMA.MIT.EDU >Subject: SV: [PIC]: Weather Sensors > >Lawrence, > >I am working on some weather modules for the VSCP (http://www.vscp.org) >project of mine. Don't now if they ever will be finished but it's fun to >work with... I will post the stuff I developed on the mentioned site >with the first being a temperature & Humidity module. I use the SH11 >http://www.sensirion.com/humidity for this module with a 18F258. > >For wind speed there is an interesting kit from kitsrus ( >http://www.kitsrus.com/pdf/k168.pdf ) using Ultrasonic. Interesting with >something without moving parts. > >For pressure you have the Motorola parts. You have some 1-wire stuff >here http://www.simat.enta.net/v3barocal.html that can easily be adopted >for a pic. > >For visibility I am looking into some scattering sensors. Should be >doable with a PIC and some IR transmitter/sensors. > >I would love to be able to monitor lightning. Some stuff is abailable on >the net but the nicest solution would be to be able to detect distance >as well as a strike. > >For rain AAG have some solutions. I think its hard to come up with a >solution here that is without moving parts. > >The simplest and possibly the most low cost solution is to use 1-wire >and the weather station from AAG http://www.aagelectronica.com . Maybe >letting a PIC do the 1-wire part. > >Regards >/Ake > >-----Ursprungligt meddelande----- >Fran: pic microcontroller discussion list >[mailto:PICLIST@MITVMA.MIT.EDU]For llile@SALTONUSA.COM >Skickat: den 14 maj 2004 20:35 >Till: PICLIST@MITVMA.MIT.EDU >Amne: [PIC]: Weather Sensors > > >Anybody done a weather station with a PIC? > >What did you use for a barometric pressure sensor? Wind speed sensor? > >Of course there are some stock sensors that come to mind (motorola?) >mostly targeted at the industrial lab market ($$$). I am looking for >low >cost consumer solutions that have already been tried. > > >-- Lawrence Lile > >-- >http://www.piclist.com#nomail Going offline? Don't AutoReply us! >email listserv@mitvma.mit.edu with SET PICList DIGEST in the body > >-- >http://www.piclist.com#nomail Going offline? Don't AutoReply us! >email listserv@mitvma.mit.edu with SET PICList DIGEST in the body -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details. -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.