>-----Original Message-----
>From: Luis Moreira [mailto:Luis.Moreira@JET.EFDA.ORG]
>Sent: 13 May 2004 08:41
>To: PICLIST@MITVMA.MIT.EDU
>Subject: Re: ] fibre-optics TX/RXl
>
>
>Hi Mike
>the bit rate needed is quite low (10Mbs) the optical
>connection is SMA. this are full modules, what I need is the
>optical connector with the photodiodes for RX/TX the rest of
>the module I have with it's own protocol which is custom not a
>specific one. I just need to find a replacement for the RX/TX
>part not the module. regards
>        Luis

Sorry, I don't know of any compaines that manufacture this but I'll ask
around here at work for you.  You might want to have a look at
http://optical-components.globalspec.com/ to find compaines that supply
optical components.

Regards

Mike




=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================
Any questions about Bookham's E-Mail service should be directed to
postmaster@bookham.com.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.