Looking for female part though with long enough pins so a ribbon cable connector fits on the solder side. preferably a 2*5 of something that can be cut/broken to size. Peter ----- Original Message ----- From: "John N. Power" To: Sent: Wednesday, May 12, 2004 3:28 PM Subject: Re: [EE:] what is this connector > > From: Peter van Hoof[SMTP:pvh@ADELPHIA.NET] > > Sent: Monday, May 10, 2004 9:27 PM > > To: PICLIST@MITVMA.MIT.EDU > > Subject: Re: [EE:] what is this connector > > > not quite > > the part i am looking for would solder on my circuit board and would fit > > between the two connectors you mention > > a female type socket with longer pins (like wire wrap pins) where the ribbon > > cable fits on the pins sticking out on the solder side > > Digi-Key sells dual male headers with variable number of pins and variable > length pins. The dual row straight headers are available up to 72 pins > (total, 2 rows of 36). The longest pins are 0.318" on one side, and 0.520" > on the other. This should be long enough to take a connector on the 0.318" > side, and penetrate a 1/16" board with enough length left to accept another > connector on the 0.520" side. Try part number S2252-36-ND (tin plated pins). > Gold pins cost more. The manufacturer is Sullins. The pins are 0.025" square. > Part numbers are made up from the number of pins, plating type, configuration > (straight or right angle, dual or single row), and lengths of pins on each side. > > John Power > > -- > http://www.piclist.com hint: The list server can filter out subtopics > (like ads or off topics) for you. See http://www.piclist.com/#topics > -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics