On Mon, 3 May 2004 13:52:39 +0200, Ruben Undheim wrote:

>Hello!
>I have just made my first SMD-board. Jippii!
>But I can't find out how the connection between the two sides of the PCB are
>made in professional PCBs.
>What I mean is the small holes that connect for example the ground on the
>top copper layer to the ground on the bottom layer, like you can see
>everywhere on for example computer cards.
>
>Anyone having any suggestions/hints about this? .. Where I can buy equipment
>for it, and how I should do it. Thank you!
>

You may want to check the message archives at:

http://groups.yahoo.com/group/Homebrew_PCBs


You'll probably find more there than you ever wanted to know. :=)


Regards, Bob

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.