On Friday, Apr 23, 2004, at 01:32 US/Pacific, Jan-Erik Soderholm wrote:

>> I've been wondering how to best go about setting multiple flags when
>> setting up INTCON for example. So, to begin with I was doing:
>>
>>         movlw   b'10100000'     ; Enable timer interrupts
>>         movwf   INTCON
>>
>> I presume that the recommendation is to set the flags individually,
>> even though it might cost an instruction or two, for the sake of
>> being easier to read:
>>
>>         clrf    INTCON
>>         bsf     INTCON,T0IE
>>         bsf     INTCON,GIE

how about
        movlw   (1<<TOIE)|(1<<GIE)
        movwf   INTCON

BillW

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.