> If you only use the editing and building (assembly/link) parts of
> MPLAB, you could easily replace these parts with some
> full blown editor (like UltraEdit32) and then write up some makefiles

That's what I do, but others use MPLAB to edit and build.

> to run MPASM, <some C compiler> and MPLINK to build the HEX file.

Actually, only the C compiler's assembler and linker get used.

> If you use MPSIM, you might have to use MPLAB anyway, I don't
> know realy...

I was hoping that somebody had done it, so that F10 from inside MPLAB runs
a make file.

Gerhard

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics