May I suggest 2 and 3 for Tx and Rx, respectively, relative to a DTE?
(No suggestion for common.)

-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of William Chops Westfield
Sent: Tuesday, April 20, 2004 12:26 PM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [EE:] RS232 RJ12 pinout

On Tuesday, Apr 20, 2004, at 11:50 US/Pacific, Colin Constant wrote:

> When you bring an RS232 port out to a RJ12 plug or jack, is there any
> standard pinout?

no.  :-(

Actually, there are/were SEVERAL standards, all different, which is
almost worse...

BillW

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu


This email, and any documents attached, may contain confidential and/or l=
egally privileged information for the sole use of the intended recipient =
named above. If you have received this email in error, please notify the =
sender and delete this email. Any copying, distribution, or use of the co=
ntents is strictly prohibited.

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu