does the same code work with the 877 (not the a version)?
if single step does not work with both versions of the 877, you might =
have used 1 stack level too much.
as far as I know, single step requires for an additional stack level, =
and you have to reserve some registers for the icd.
tino

*************************************************************************=
*****************************

>-----Original Message-----
>From: Doormat [mailto:doormat@LVCM.COM]
>Sent: Sunday, April 18, 2004 7:12 AM
>To: PICLIST@MITVMA.MIT.EDU
>Subject: [PIC:] problem w/ ICD version 1 and 16F877A
>
>I've got a problem running the ICD w/ the 877A. I've upgraded the ICD
>firmware to 2.40.01. The ICD works fine (programs and allows me to step
>through the code) w/ the few 877s I have around, and it has been able =
to
>program the 877A just fine. But when I go and try to step through the
>code w/ an 877A, it refuses to go. Any ideas? (same exact settings each
>time)
>
>-Anthony
>
>--
>http://www.piclist.com hint: The PICList is archived three different
>ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body