Matt Marsh wrote :

> If so, I might have to do
> without CCP and do it the more manual approach as I was hoping to
> do this on one of the small 8-pin 12F629 (or similar) chips.

There is nothing in the 12Fxxx chips stopping you to use it as a
recevier for IR remote control codes. Just use whatever tools they have.

Let me know if you'd like a copy of my 12F675 code, and I'll
zip it up and send it over. Note that this is a maybe 80% done project,
but the I think that the IR part was more or less running OK.
And also, it was written to use Olin Lathrops development environment,
so it used his macros where appropriate, but I think you could
replace them with your own code...

Jan-Erik.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.