Only if you have a little power to spare, you can just use a two resistor
voltage divider. Center point to one leg of the LED and the other leg to the
output of the PIC.
Rick

Chris Oesterling wrote:

> All,
> I'm hoping to find a simpler solution to what I thought would be a
> simple task of driving a single green/red bicolor LED from a PIC.
> Reversing polarity isn't easy!  I have found an old article that uses a
> relay or suggests a better solution of using a couple of transistors and
> resistors.  Sorry for such a basic question.  I searched the archives
> and only found a matrix solution.
> Thank you!
> - Chris
>
> --

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.