PC Logic is still high in the running for me, but I wish that I could tes=
t the=20
full dev cycle -- saving a project, exporting netlists, created a board f=
rom=20
the schematic, etc -- even if it were limited to a few components.  But I=
'm=20
still playing with it.

Cheers,
-Neil.



On Tuesday 13 April 2004 07:56 am, victorf57@COX.NET scribbled:
> On the web site it said the max size was 16x 10 or????.
> And I have had no problem,other then a couple months ago
> I needed to panelize and there was no way to do this, since pclogic did=
n't
> have a copy paste command so I contacted Brad,  the owner and told him =
the
> problem he did say that he was working on this but, I had to go with Ri=
mu
> because I couldn't wait. But he has emailed me my Upgrade and it can no=
w
> panelize.
> I do prefere PClogic over some others I have tried because
> it's a very short learning curve.
> very simple interface.
> regards
> victor
>
> > From: fred jones <boattow@HOTMAIL.COM>
> > Date: 2004/04/13 Tue AM 08:26:27 EDT
> > To: PICLIST@MITVMA.MIT.EDU
> > Subject: Re: [EE:] Good schematic & PCB layout software?
> >
> > I was using this software up until about 2 or 3 years ago and switche=
d.=20
> > I was laying out a board (8"X8") and only had a couple of components =
left
> > to add when it reached its limit.  I emailed the author and after a w=
eek
> > he did send me a custom version that would allow a few more component=
s so
> > I could finish it up but apparently its 16bit or DOS based or somethi=
ng
> > and I had hit the limit.  I don't know if it's better now but I wasn'=
t
> > impressed with it.  Its bound to have been improved now.  It's certai=
nly
> > cheap enough to try and I see now you can download a demo version.  T=
he
> > software I'm using now, Circad from www.holophase.com is ok but it
> > doesn't autoroute so I'd be interested in a better product at a
> > reasonable price.  Just afraid to try PC logic again.
> > Good luck,
> > FJ
> >
> > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D
> > Okay ... I'm looking at the PC Logic website now.  Looks promising.  =
I'll
> > be back....
> >
> > Thanks,
> > -Neil.
> >
> > On Monday 12 April 2004 07:10 am, victorf57@COX.NET scribbled:
> >  > google for pclogic, cheap,auto router,2 layer only,large size.
> >  > also look at rimu pcb also cheap but no auto router.
> >  > regards
> >  > victor
> >
> > --
> > http://www.piclist.com hint: The list server can filter out subtopics
> > (like ads or off topics) for you. See http://www.piclist.com/#topics
> >
> > _________________________________________________________________
> > Limited-time offer: Fast, reliable MSN 9 Dial-up Internet access FREE=
 for
> > 2 months!
> > http://join.msn.com/?page=3Ddept/dialup&pgmarket=3Den-us&ST=3D1/go/on=
m00200361a
> >ve/direct/01/
> >
> > --
> > http://www.piclist.com hint: The PICList is archived three different
> > ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.