Gordon Williams wrote:
> Hi,
>
> I've used the Garmin 16 (not the A version) on a few computers, even on a
> 486 laptop, and not had any problem with it.  I've used it in both NMEA and
> binary mode.  Switching from NMEA to binary is a bit of a hassle though.

Yes, I had one of those, but it got itself fried somehow (sent to garmin
for repairs, this was a very good unit.

> I would guess that your problem more likely lies in the speed setting on
> your port or other port parameters.  The GPS 16 operates at 9600, but the
> 16A may operate at a faster rate due to the increased data.  If you have
> wired the plug connector, I would recheck your wiring and wiring
> assumptions.

yes, that was stated in the documentation, factory settings were 19200
bit/s, this is what I was trying...

>
> All I can suggest is that you re-read the manual.
>
> Regards,
>
> Gordon Williams

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body